Loop End Cables
Loop End Cables
Loop End Cables
Pre-formed loop-end wire ropes ready for direct attachment to anchors and suspension hardware. Ferruled at the loop end for full load-rated grip — eliminating field crimping and the tools and labor that go with it.
Standard Drop Lengths
- 60"
- 120"
- 180"
- 240"
- Longer lengths available on request
LOOP KIT Packs
LOOP KITs are sold in packs of 10. Each pack includes:
- 10 ferruled pre-formed loop-end wires of your chosen length
- 10 NEBULOK cable grippers matched to the wire diameter
Sizing & Safe Working Loads
| Gripper | Cable | SWL |
|---|---|---|
| NL1 | 3/64" | 18 lbs |
| NL2 | 1/16" | 125 lbs |
| NL2 | 3/32" | 150 lbs |
| NL3 | 1/8" | 250 lbs |
Technical Specifications
- High tensile strength wire
- 1960/mm² grade
- 7 × 7 formation
- Manufactured to BSEN 12385 standard
- Tool-less release mechanism
- 90% recycled material
Where to Use
Suitable for any wrap-around installation:
- Purlins and beams
- Building substrates
- Through eyebolts
- Universal beams (RSJ's)
Installation
- Pass wire around fixing point
- Thread the end of the wire through the loop
- Insert wire into the NEBULOK as the arrow shows
- Pass through or around the suspension fixing point
- Pass wire back through the free channel of the NEBULOK
- Leave approximately 6 inches of wire protruding
- Confirm engagement by pushing the adjustment rod in the opposite direction of the arrow
